RUST BAN #5711
Rust Inhibitor

Prevents rust on iron and steel for up to two years when stored inside at ambient temperatures and humidity. Treated metal can be machined, stamped or welded as normally; remove with water before painting.

Recommended Use Dilutions
shown as % of solution volume & equivalent fluid ounces per gallon solution

Dilute in hot or cold water. The dilution required depends on the type of iron or steel, on storage conditions, and on duration of storage.

For protection up to 90 days, at least.............	3% Sol = 3.8 oz/gal.
For protection up to 2 years, at least.............	5% Sol = 6.4 oz/gal.
For any unusually severe conditions, up to....	10% Sol = 12.8 oz/gal.

For best results, apply by immersion or spray; may be painted on or wiped on. Normally, let air dry; blow-drying is faster but not necessary. A 3% solution on steel or cast iron dries in less than 3 hours under common conditions. When dry, the metal has no visual change; it feels smooth and waxy; it is not sticky.

Properties - DOT Class - Active Components - Precautions

Contains organic and inorganic rust preventives, anionic and nonionic wetting agents. Contains no nitrites, no chromates, no phosphates.

Alkaline liquid. Avoid contact with skin and eyes, especially when undiluted. In case of contact, flush with water, eyes for at least 15 minutes; for eyes, get medical attention. Wear rubber or neoprene gloves if hands must be immersed. For industrial use only. Keep out of reach of children.