INSTAWAX
Liquid Spray-Wax for Automotive Finishes

For automatic spray-waxing of cars; most common use is in drive-thru car washes. It produces a glossy, water-repellant finish when sprayed on clean automobile bodies; it causes water to form beads as on any waxed surface; it protects bare metal against rust; it promotes better rinsing and thus reduces drying time and wiping labor.

To Use

Prepare Feed Solution by mixing one part Instawax with 10 parts water. If mixed in a drum, a 1:10 mixture is equivalent to 5 gallons Instawax mixed with 50 gallons water to make 55 gallons Feed Solution. Use hot or cold water; hot is recommended for easier mixing. Mix well until a uniform solution is secured as indicated by a uniform color.

Apply Feed Solution just before the car enters the dryer. Apply by injecting 8 ounces of Feed Solution into the spray-wax water; or, if a separate spray-wax cycle is not used, inject into the last 3 gallons of the rinse water. Blow dry.

At these rates of dilution and application, the quantity of Instawax actually applied is 0.7 ounces per car.

Properties

Clear, green liquid. Mild odor. Non-Flammable. Moderate viscosity.